Tag Archives: Spyderco Delica

Spyderco Delica hand engraved front side finished.

Spyderco Delica hand engraved front side finished. Just finished the final shading cuts on the western scroll. All that is left is a little cleaning and this side is completed. Continue reading

Posted in Knives | Tagged , , , , , | Leave a comment

Progress Report on Spyderco Delica Hand Engraving

I gentle tap the chisel with a chasing hammer to cut the lines.The next step will be to shade the leaves and that is done by hand pushing the graver to cut light lines on the leaves. Continue reading

Posted in Knives | Tagged , , , | Leave a comment

Devil Doc themed Spyderco Delica

Andy and I were both assigned to FOXTROT Surgical Support Company, 1st Med Bn, 1st MEF during Desert Shield/Storm and through the magic of FaceBook have found each other. Now we are designing a knife with Andy’s company logo and my western scroll. Continue reading

Posted in Knives | Tagged , , , , , , , , , | Leave a comment

Spyderco Delica – Hand engraved

The backside is completely covered with engraving. Continue reading

Posted in Knives | Tagged , , , , , | Leave a comment

On the Bench…

Montana Artisan’s creations also waiting personalization. This is a simple lettering project on some wonderful wine opener knives. Continue reading

Posted in Firearms, Knives | Tagged , , , , , , , , , , | Leave a comment

Spyderco Delica hand engraved – Update.

The Steampunk themed knife is looking pretty wild. The pocket clip goes on and runs left to right and I designed this to show gears and things underneath the clip. Continue reading

Posted in Knives | Tagged , , , , , , , | Leave a comment

Spyderco Delica engraved motorcycle theme

Stared today on the “easy” part of the engraving. I worked on the Steampunk portion of the front and the lettering. Gears were really fun to engrave. I used round #52, round #50, 120 degree graver, a 105 degree graver and a 90 degree graver. Continue reading

Posted in Knives | Tagged , , , , , , | Leave a comment

Spyderco engraved knife

a Spyderco Delica with an engraved motorcycle and rider on it. The rest of the knife will have a steampunk theme. Continue reading

Posted in Knives | Tagged , , , , | Leave a comment

Custom engraved Knives

The scrolls were cut with a 105 degree graver and a GRS C-Max 90 degree graver was used for all the shading. Total engraving time 11 hours. Continue reading

Posted in Knives | Tagged , , , , | Leave a comment

Spyderco Delica Completed

The lettering is small so it took a little longer to do. I used a #50 round graver for the lettering and a 120 degree graver for the anchor and heart. Continue reading

Posted in Knives | Tagged , , , | Leave a comment